Standard 30 MF Gyro Compass vs SMIDS MK II Legacy Speed Log
Integrated Bridge Systems comparison
·
2 products
·
View all Integrated Bridge Systems
The Raytheon Anschuetz Standard 30 MF Gyro Compass and AMI Marine SMIDS MK II Legacy Speed Log are both integrated bridge systems products certified to MED.
Standard 30 MF Gyro Compass
SMIDS MK II Legacy Speed Log
Specification comparison
Specification
Standard 30 MF Gyro Compass
SMIDS MK II Legacy Speed Log
Accuracy (Heading)
0.25 sec Lat. deg RMS
Accuracy (Roll & Pitch)
0.2 deg RMS
Accuracy (Rate of Turn)
0.5 deg/min + 5% of indicated ROT
Settling Time
30 minutes
MTBF
>100,000 hours
Supply Voltage
24 (10-36) VDC
Power Consumption
24 W
Temperature Range
-20 to +60 C
Storage Temperature
-40 to +70 C
Permissible Roll/Pitch
60 deg
Serial Inputs
3 (RS422)
Serial Outputs
4 (RS422, NMEA or Course Bus)
Ethernet Interfaces
2 (IEC 61162-450)
CAN Bus Cable Length
400 m
Analog Output ROT
+/-10V
Sensor Technology
Hemispherical Resonator Gyroscope (HRG)
GNSS Systems
GPS and GLONASS
Measurement Type
Speed over ground
System Type
SDME (Speed Distance Measuring Equipment)
Certification comparison
Certification
Standard 30 MF Gyro Compass
SMIDS MK II Legacy Speed Log
DNV
✓
— Not listed
LR
✓
— Not listed
MED
✓
✓
Other Integrated Bridge Systems comparisons
Data sources
Standard 30 MF Gyro Compass
Data from anschuetz.com ·
View original
SMIDS MK II Legacy Speed Log
Data from amimarine.com ·
View original
The equipment specifications, certification references, and compliance data presented on SOLASindex have been compiled from publicly available manufacturer websites and documentation. This information is provided for reference purposes only.
SOLASindex does not certify, endorse, or recommend any product or manufacturer. We are an information platform, not a certification body, marketplace, or regulatory authority.
This information is not a substitute for:
Official product documentation from the manufacturer
Current certification records from classification societies or the EMSA MED Portal
Regulatory compliance verification with your flag state authority
Professional procurement or maritime safety advice
Equipment certifications may expire, be modified, suspended, or withdrawn at any time. Specifications may change between production runs. Always verify current certification status, specifications, and SOLAS compliance directly with the manufacturer and your classification society before making procurement decisions.
Data accuracy: While we strive to present accurate and current information, we do not warrant or guarantee the completeness, accuracy, or currency of any data displayed. Information reflects what was publicly available at the time of extraction.
Manufacturers: If any data about your products is inaccurate, claim your listing to correct it directly, or contact us at corrections@networklayer.ai . We will address reported inaccuracies within 5 business days.