Standard 30 MF Gyro Compass vs GEOLOG Dual-Axis GNSS Speed Log System

Integrated Bridge Systems comparison · 2 products · View all Integrated Bridge Systems

The Raytheon Anschuetz Standard 30 MF Gyro Compass and AMI Marine GEOLOG Dual-Axis GNSS Speed Log System are both integrated bridge systems products certified to MED.

Standard 30 MF Gyro Compass
GEOLOG Dual-Axis GNSS Speed Log System

Specification comparison

Specification Standard 30 MF Gyro Compass GEOLOG Dual-Axis GNSS Speed Log System
Accuracy (Heading) 0.25 sec Lat. deg RMS
Accuracy (Roll & Pitch) 0.2 deg RMS
Accuracy (Rate of Turn) 0.5 deg/min + 5% of indicated ROT
Settling Time 30 minutes
MTBF >100,000 hours
Supply Voltage 24 (10-36) VDC
Power Consumption 24 W
Temperature Range -20 to +60 C
Storage Temperature -40 to +70 C
Permissible Roll/Pitch 60 deg
Serial Inputs 3 (RS422)
Serial Outputs 4 (RS422, NMEA or Course Bus)
Ethernet Interfaces 2 (IEC 61162-450)
CAN Bus Cable Length 400 m
Analog Output ROT +/-10V
Sensor Technology Hemispherical Resonator Gyroscope (HRG)
Axes 2 (fore/aft and athwartships)
Sensor Configuration Single sensor
Measurement Type Speed over ground (GNSS)

Certification comparison

Certification Standard 30 MF Gyro Compass GEOLOG Dual-Axis GNSS Speed Log System
DNV ✓ — Not listed
LR ✓ — Not listed
MED ✓ ✓

Other Integrated Bridge Systems comparisons

Data sources

Standard 30 MF Gyro Compass
Data from anschuetz.com ·
View original
GEOLOG Dual-Axis GNSS Speed Log System
Data from amimarine.com ·
View original