InterAct GUI vs SEM-SAFE Bilge Nozzle Type BT (HNDP-0-12-1.26-00)

Fire Suppression Systems comparison · 2 products · View all Fire Suppression Systems

The Unifire InterAct GUI and Danfoss Semco SEM-SAFE Bilge Nozzle Type BT (HNDP-0-12-1.26-00) are both fire suppression systems products.

InterAct GUI

SEM-SAFE Bilge Nozzle Type BT (HNDP-0-12-1.26-00)

Unverified

Full specs → roboticnozzles.com

SEM-SAFE Bilge Nozzle Type BT (HNDP-0-12-1.26-00)

Unverified

Danfoss Semco ·

Full specs → components.semcomaritime.com

Specification comparison

Specification	InterAct GUI	SEM-SAFE Bilge Nozzle Type BT (HNDP-0-12-1.26-00)
Interface Type	Web-based GUI
Device Compatibility	PC, laptop, tablet, smartphone
Controllable Devices	Robotic nozzles, CCTV cameras, flame detectors, infrared cameras
Access	Network-based (local or remote)
Nozzle ID		BT
Operating Pressure		60 bar
K-factor		1.258
Max Ceiling Height		1.5 m
Nozzle Spacing		2.7 x 3.0 m
Max Distance to Bulkhead		Half spacing
Orientation		Pendent
Material		Nozzle head: CuZn36Pb2As (brass) NiSn coated; Top: AISI 316L
Pipe Connection		12mm DIN 2353 M12L
Part Number		8068629

Certification comparison

Certification	InterAct GUI	SEM-SAFE Bilge Nozzle Type BT (HNDP-0-12-1.26-00)
DNV	— Not listed	✓
LR	— Not listed	✓
SOLAS	— Not listed	✓

Other Fire Suppression Systems comparisons

Data sources

InterAct GUI

Data from roboticnozzles.com ·

View original

SEM-SAFE Bilge Nozzle Type BT (HNDP-0-12-1.26-00)

Data from components.semcomaritime.com ·

View original

The equipment specifications, certification references, and compliance data presented on SOLASindex have been compiled from publicly available manufacturer websites and documentation. This information is provided for reference purposes only.

SOLASindex does not certify, endorse, or recommend any product or manufacturer. We are an information platform, not a certification body, marketplace, or regulatory authority.

This information is not a substitute for:

Official product documentation from the manufacturer
Current certification records from classification societies or the EMSA MED Portal
Regulatory compliance verification with your flag state authority
Professional procurement or maritime safety advice

Equipment certifications may expire, be modified, suspended, or withdrawn at any time. Specifications may change between production runs. Always verify current certification status, specifications, and SOLAS compliance directly with the manufacturer and your classification society before making procurement decisions.

Data accuracy: While we strive to present accurate and current information, we do not warrant or guarantee the completeness, accuracy, or currency of any data displayed. Information reflects what was publicly available at the time of extraction.

Manufacturers: If any data about your products is inaccurate, claim your listing to correct it directly, or contact us at corrections@networklayer.ai. We will address reported inaccuracies within 5 business days.