Force 80 SeaSerpent vs SEM-SAFE High-Pressure Water Mist System for Accommodation

Fire Suppression Systems comparison · 2 products · View all Fire Suppression Systems

The Unifire Force 80 SeaSerpent and Danfoss Semco SEM-SAFE High-Pressure Water Mist System for Accommodation are both fire suppression systems products. Key difference: Operating Pressure — Force 80 SeaSerpent is 10 bar vs SEM-SAFE High-Pressure Water Mist System for Accommodation at 100 bar.

Force 80 SeaSerpent
SEM-SAFE High-Pressure Water Mist System for Accommodation

Specification comparison

Specification Force 80 SeaSerpent SEM-SAFE High-Pressure Water Mist System for Accommodation
Flow Rate 5000 lpm
Flow Rate (Imperial) 1320 gpm
Operating Pressure 10 bar 100 bar
Pipe Diameter 80 mm
Horizontal Movement 360 degrees
Vertical Movement 180 degrees
Material Stainless Steel 316L (marine-grade, acid-proof) AISI 316 stainless steel piping
Motor Type 24V DC brushless (BLDC)
Valve Stainless steel ball valve
Mounting Portable mounting pipe (quick install/remove)
Agent Type High-pressure water mist (pure fresh water)
Standby Pressure 10 - 15 bar
Nozzle Type Closed with glass bulb (automatic activation)
Activation Temperature 57 C
Droplet Size 10 - 50 micron
Nozzle Spacing Up to 5.5 m
Max Ceiling Height 2.5 m
System Configuration Wet pipe with pressurized standby
Emergency Backup Minimum 1 minute capacity at max required flow

Certification comparison

Certification Force 80 SeaSerpent SEM-SAFE High-Pressure Water Mist System for Accommodation
BV — Not listed ✓
CCS — Not listed ✓
DNV — Not listed ✓
LR — Not listed ✓
MED — Not listed ✓
NK — Not listed ✓
SOLAS — Not listed ✓
USCG — Not listed ✓

Other Fire Suppression Systems comparisons

Data sources

Force 80 SeaSerpent
Data from roboticnozzles.com ·
View original
SEM-SAFE High-Pressure Water Mist System for Accommodation
Data from ·